Knowledgebase: CDMA-S
CDMAS: Bring Your iPhone to Red Pocket
Posted by Red Pocket Mobile Customer Service on 15 October 2014 10:50 PM

CDMA-S iPhone BYOSP 

• iPhone BYOSP is available  for iPhone 4, iPhone 4s , iPhone 5 , iPhone 5s and iPhone 5c

• iPhone cannot be active  with another Sprint MVNO 

• Device cannot be reported as lost  or stolen

 

 HOW TO ACTIVATE an iPHONE

 

Reset Network Settings

·         It is highly recommended that you are connected to Wi-Fi when programming the Device

·         Select Settings on your iPhone

·         Scroll down and select General

·         Scroll down to the bottom and select Reset

·         Select the option for Reset Network Settings

·         Device will reboot and may require logging into your Apple ID

·         Wait 3 minutes and then place a test call to 611 to confirm device has been activated

·         If Device does not activate, Update Data Settings

 

Update Data Settings

·         Dial ##873283#

·         Press the Green Call Button

·         Press OK when see Starting Service Update

·         Press OK when you see Service Update Complete

·         Place a test call to 611 or another number.  If call does not work, please restart your device

 

If the data has not worked since activation this maybe device related. The phone may not be programmed correctly. Use  ##update# if that does not work, you may  use ##clear#. 

If that fails, connect to wifi and then try the ##update#.

If all else fails, factory reset the phone.Go to device settings and reset the phone completely. This will erase everything on the phone. Please note  that performing factory reset will permanently delete all contacts, pictures, settings, call, sms and browsing history.  Make sure to have a back up before doing a factory reset.

(12 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below. This is required to prevent automated registrations and form submissions.